Singer MX60 User Manual

20
Removing the presser foot
Push the presser foot (e) to disengage from the cut-out (c). (1)
Attaching the presser foot
Install the pin (d) of the presser foot (e) into the cut-out (c) of
the presser foot holder. (2)
Removing and attaching the presser foot shank
Raise the presser bar (a) with the presser foot lifter.
Remove and attach the presser foot shank (b) as illustrated.
(3)
Attention:
Turn power switch to o󰀨 (“O”) when carrying out any of the
above operations!
Changing the Presser Foot
e
c
b
a
c
d
e
b
a

Singer MX60 Specifications

General

Buttonhole Type	4-step
Free Arm	Yes
Type	Mechanical
Buttonhole Styles	1
Needle Threader	Yes
Max Stitch Length	4mm
Max Stitch Width	5mm
Stitch Options	Straight, zigzag, buttonhole
Presser Feet	Buttonhole, zipper