Store presser feet, bobbins, needles and other accessories in
the accessory tray so that they are easily accessible.
Keep the accessory tray on the machine to provide a larger, flat
work surface.
Use the free arm to facilitate sewing trouser legs and sleeve
hems. To use the free arm, slide off the accessory tray. When
attached, a hook keeps the accessory tray securely attached to
the machine. Remove the tray by sliding it to the left.
When the accessory tray is removed from the machine, open
the door by putting a finger in the groove at the left side of the
accessory box (A) and carefully pull it open. Push the door
closed before putting the tray back onto the machine.
Presser Foot Lifter
The presser foot lever is located at the right side of the sewing
machine head. The lever is used to raise and lower the presser
foot. Raise the lever up for machine threading, lower it for
sewing.
By raising the presser foot lever and then pressing it farther
upwards, the lift height of the presser foot is increased to an
extra height allowing you to slide very thick projects under the
foot.
Thread Knife
To use the thread knife, pull the thread from back to front as
illustrated. Doing this will leave the thread ends long enough
so that the needle doesn't become unthreaded when you start to
sew again.
10 – Preparations
English
To Next Page
Loading...
Need help?
General
