Exterior car care
Read and observe and on page 114 first.
Vehicle compo-
nents
Circumstances Remedy
Paint
Spilled fuel
Clear water, cloth, (clean as soon as
possible)
No water drop-
lets form on the
paint
Use hard wax preserve (at least twice a
year), apply wax to clean and dry body
Paint has gone
matt
Use polish, then wax (if the polish does
not contain any preservative ingredi-
ents)
Plastic parts Soiling
Clear water, cloth / sponge, possibly
cleaners provided for this purpose
Chrome
and anodised
parts
Soiling
clear water, cloth, possibly cleaners
provided for this purpose, clean then
polish with a soft dry cloth
Films Soiling Soft sponge and mild soap solution
a)
Windowpanes
and door mirrors
Soiling
Wash with clean water and dry with a
wipe specifically for that purpose
Head / tail lights Soiling Soft sponge and mild soap solution
a)
Door lock cylin-
ders
Snow/ice
De-icing fluid specifically for that pur-
pose
Wiper / wiper
blades
Soiling Windscreen cleaner, sponge or cloth
Wheels Soiling
Clear water, then apply appropriate
substance
a)
Mild soap solution = 2 tablespoons of natural soap to 1 litre of lukewarm water.
The jack is maintenance-free. If necessary, the moving parts of the jack should
be lubricated with a suitable lubricant.
Protection of cavities
All the cavities of your vehicle which are at risk from corrosion are protected by
a layer of long-lasting protective wax applied in the factory.
If any small amount of wax flow out of the cavities at high temperatures, these
must be removed with a plastic scraper and the stains cleaned using a petrole-
um cleaner.
Underbody
The underside of your vehicle is already permanently protected by the factory
against chemical and mechanical influences.
We recommend having the protective coating — preferably before the begin-
ning of winter and at the end of winter.
Product life of the films
Environmental influences (eg. sunlight, humidity, air pollution, chipping) will af-
fect the life of the films. Films will age and become brittle - this is entirely nor-
mal; this is not a fault.
The sunlight may also affect the strength of the film colour.
When transporting a load on the roof rack (e.g. roof box or similar) there is an
increased risk of film damage (e.g. of chipping from the secured load).
CAUTION
■
Vehicle paint
■
Repair damaged areas as soon as possible.
■
Matt-painted parts should not be treated with polishes or hard waxes.
■
Do not polish in a dusty environment - risk of paint scratches.
■
Do not apply any paint care products to door seals or window guides.
■
Plastic parts
■
Do not use paint polish.
■
Chromed and anodised parts
■
Do not polish in a dusty environment - risk of surface scratches.
■
Films
The following instructions must be observed, otherwise there is a risk of film
damage.
■
Do not use dirty cloths or sponges for cleaning.
■
Do not use a scraper or other means to remove ice and snow.
■
Do not polish the films
■
Do not use a high pressure cleaner on the films.
■
Rubber seals
■
Do not treat the door seals and window guides deal with anything - the
protective varnish coating could be damaged.
115
Care and maintenance
To Next Page
Loading...
Need help?
General
