SKY-WATCHER SynScan EQ6 Pro User Manual

20
1. Choosing an Object:
2. View Information on the Object:
3. Locate the Object:
Press the “M” shortcut key on the SynScan hand control. The screen will display “Messier
Catalog / Messier =” to wait for input of the 3 digits Messier index number which is between
1 and 110.
• Use the number keys on the keypad to enter a number at the cursor position.
• Use the left or right direction keys to move the cursor.
• A 3-digit number starting with a 0 is acceptable. Ex. 001 = 01 = 1
• Press ENTER key to proceed to the next step.
The screen will display “View Object?”
• Press the ESC key to return to the previous step.
• Press the ENTER key to have the mount slew towards the target. When the mount
stops, the SynScan hand control will give a long beep, and then return to the previous
step. The mount will also automatically start tracking the object.
» The object is below the horizon; or
» On an alt-azimuth mount, the object’s altitude exceeds the limit set by the hand control
(Section 11.3). (The screen will display “Target over slew limit” in this case.)
• Users can press the ESC key to stop the mount. The screen will display “Mount stopped.
Press any key…”. Users can press any key to return to the previous step.
Note: The mount will not slew if:
• If the selected object is below the horizon at this time, the SynScan hand control will
display “Below horizon” for 2 seconds; otherwise, it will display the object’s current az-
imuth and altitude.
• By using the scroll keys, users can browse the following information of the object:
J2000 celestial coordinates, magnitude (MAG=), rising time (Rise:), transit time (Tran-
sit:), setting time (Set: ), size (Size=) and associated constellation (Constellation: ).
• Press ENTER key to proceed to the next step.
Users can access several popular celestial object catalogs stored in the SynScan hand control
and control the telescope mount to locate a specic object in the catalogs. The object location
function is available for either “Full Feature” mode (Section 1.4 Step 1) or “Easy Tracking”
mode (Section 1.4 Step 2) of the mount.
5.1 Locating Messier Objects
PART V : LOCATING OBJECTS

SKY-WATCHER SynScan EQ6 Pro Specifications

General

Brand	SKY-WATCHER
Model	SynScan EQ6 Pro
Category	Racks & Stands
Language	English