5
-Click FEATURE & SETTINGS
The
i.q.
-Click
feature is a button on the
underside of the Faucet spout that allows
the user to place the Faucet into the
following function modes: Continuous Run,
Temporary Off, Permanent Off and Auto Set
Range Adjustment.
Continuous Run —
Water flows from
1 - 20 minutes constantly — for easy
filling of sink, pail or for hygienic
handwashing. Default setting is two (2)
minute run time.
Temporary OFF —
Water flow is deactivated up to two (2) minutes — for
convenient cleaning of sink and faucet.
Auto Set Range Adjustment —
All Faucets feature the Auto Set function.
The detection area is automatically adapted to the sink where the Faucet
is installed and this occurs upon initial power up. Thus reflection is
prevented and a maximum of user convenience provided.
Function Press Button LED Signal
C
ontinuous Run — 2 minute
d
efault setting (adjustable from
1
- 20 minutes)
1
time for 2 seconds
5
short flashes
r
eset:
1
time or will reset
a
utomatically after 2 minutes
T
emporary Off
2
times (double click)
5
short flashes followed by
p
eriodic flashing
reset:
1 time or will reset
automatically after 2 minutes
Auto Set Range Adjustment
2 times (double click) and then 1
time for 5 seconds
5 short flashes followed by 4
short flashes
ADDITIONAL FEATURES
h
DEACTIVATE
1x -----
ACTIVATE
2x 12h
3x 24h
1x 24 sec +
12/24 LINE PURGE FEATURE
A
This feature will operate the faucet every 12 or 24 hours since last use, if not used to prevent stagnant water conditions.
Default purge duration is two minutes.
Consult factory regarding other timing options.
To Next Page
Loading...
Need help?
General
