Smartgen HGM7100N Series User Manual

HGM7100N GENSET CONTROLLER USER MANUAL
HGM7100N Genset Controller 2020-09-10 Version1.2 Page 6 of 47
3 SPECIFICATION OPERATION
Table 2 - Technical Parameters
Items
Contents
Operating Voltage
DC8.0V to DC35.0V, Continuous Power Supply.
Power Consumption
<4W (standby ≤2W)
Alternator Volt Input Range
3Phase 4Wire
3Phase 3Wire
Single Phase 2Wire
2Phase 3Wire
15V AC - 360 V AC (ph-N)
30V AC - 620 V AC (ph-ph)
15V AC - 360 V AC (ph-N)
15V AC - 360 V AC (ph-N)
Alternator Frequency
50 Hz/60Hz
Speed sensor voltage
1.0V to 24.0V (RMS)
Speed sensor Frequency
10,000 Hz (max.)
Starter Relay Output
16 A 28V DC at supply output
Fuel Relay Output
16 A 28VDC at supply output
Programmable Relay Output 1
7A 28V DC power supply output
Programmable Relay Output 2
8A 250V AC volt free output
Programmable Relay Output 3
16A 250V AC volt free output
Programmable Relay Output 4
16A 250V AC volt free output
Programmable Relay Output 5
7A 28V DC power supply output
Programmable Relay Output 6
7A 28V DC power supply output
Case Dimension
209mm x 166mm x 45mm
Panel Cutout
186mm x 141mm
CT Secondary Current
5A rated
Working Conditions
Temperature: (-25~+70)°C; Humidity: (20~93)%
Storage Condition
Temperature: (-25~+70)°C
Protection Level
IP65 Front panel
Insulating Intensity
Apply AC2.2kV voltage between high voltage terminal and low
voltage terminal and the leakage current is not more than 3mA
within 1min.
Weight
0.6kg

Smartgen HGM7100N Series Specifications

General

Brand	Smartgen
Model	HGM7100N Series
Category	Controller
Language	English