SMC Networks ZK2-ZSV-A Series User Manual

-17-
NO.ZK2-OM00501-B
Mounting and Installation
■Installation
Mount the O-ring provided into the O-ring groove of the pressure switch, and mount the pressure switch to
the ejector body with the two mounting screws provided. (The required tightening torque is 0.08 to 0.10 Nm)
If the tightening torque is exceeded, the mounting part can be deformed and broken.

SMC Networks ZK2-ZSV-A Series Specifications

General

Brand	SMC Networks
Model	ZK2-ZSV-A Series
Category	Switch
Language	English