SMC Networks ZK2-ZSV-A Series User Manual

-47-
NO.ZK2-OM00501-B
Troubleshooting
Troubleshooting
Applicable Pressure switch: ZK2-ZSV-A
If an operational failure of the pressure switch occurs, please select the cause of failure from the flow chart
below.
If a cause applicable to the failure cannot be identified and normal operation can be recovered by
replacement with a new pressure switch, this indicates that the pressure switch itself was faulty.
The damage to the pressure switch may have been caused by the operating environment (network
construction, etc.). Consult with SMC separately to obtain countermeasures.
Yes
No
The pressure
switch does not
operate correctly
Refer to error
No.1
The switch output
is ON
The indication
LED is ON
The indication LED
operates incorrectly
The switch output
is OFF
The switch output is
chattering
The indication
LED is OFF
The indication
LED is OFF
The indication
LED is ON
Product
failure
Refer to error
No.2
Refer to error
No.1
Refer to error
No.4
Refer to error
No.3
Product
failure
Product
failure
Refer to error
No.6
Slow switch
output response
Refer to error
No.5
An error is
displayed

SMC Networks ZK2-ZSV-A Series Specifications

General

Brand	SMC Networks
Model	ZK2-ZSV-A Series
Category	Switch
Language	English