SMC Networks ZK2-ZSV-A Series User Manual

-36-
NO.ZK2-OM00501-B
■[F90] Setting of all functions
All functions can be set, one after the other.
<Operation>
Press the or button in function selection mode to display [F90].
Press the button. Move on to setting of all functions.
[oFF] (unused)
selected.
Press the button
to set.
Return to function
selection mode.
[[on] (used) selected.
1: Setting of each function.
After the change to [oFF] (unused),
press the button to set.
Return to function selection mode.
Press the
button for 2
seconds or longer.
[F90] Setting of all functions completed. Measurement mode.
1: Setting of functions
Every time the button is pressed, the function steps in the order of "Order of function of setting" on page 37
Set by using the or buttons.
For details of how to set each function, refer to the relevant setting of function section in this manual.
Setting of all functions
Press the or button to select all functions.

SMC Networks ZK2-ZSV-A Series Specifications

General

Brand	SMC Networks
Model	ZK2-ZSV-A Series
Category	Switch
Language	English