EasyManuals Logo
Home>Smeg>Dishwasher>DI409C

Smeg DI409C User Manual

Smeg DI409C
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
User instructions

Do not use table salt as it contains insoluble substances which,
over time, may damage the water softening system.
When necessary, refill the regenerating salt container before
starting the washing program. In this way, the excess saline
solution will be immediately removed by the water; the prolonged
presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
3.2 Using the rinse aid and detergent dispensers
The detergent and rinse aid
dispensers are situated on the inner
part of the door: the detergent
dispenser is on the left, and the rinse
aid dispenser is on the right.
With the exception of the SOAK program, before every washing cycle it
is necessary to add the required amount of detergent to the detergent
dispenser. The rinse aid, on the other hand, should only be added as
required.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Smeg DI409C and is the answer not in the manual?

Smeg DI409C Specifications

General IconGeneral
BrandSmeg
ModelDI409C
CategoryDishwasher
LanguageEnglish

Related product manuals