EasyManuals Logo
Home>Smeg>Dishwasher>DI409C

Smeg DI409C User Manual

Smeg DI409C
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
User instructions

CLEANING THE FILTER UNIT
The filter
H
should be periodically removed and inspected, and if
necessary, cleaned. To remove the filter, take hold of the handle
and turn clockwise, then lift upwards.
Then separate parts
L
and
M
, and separate the two parts of the
plastic filter by pressing gently in the points shown, lifting it upwards
to extract it.
Remove the centre filter by lifting it upwards.
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT
MAINTENANCE:
The filters should be cleaned under running water using a stiff
brush.
It is essential to thoroughly clean the filters according to the
above instructions: the dishwasher cannot function if the filters are
clogged.
Carefully replace the filters in their seats, to avoid damaging the
wash pump.
PROLONGED DISUSE:
Run the soak program twice in succession.
Unplug the power cord from the socket.
Leave the door slightly open, in order to prevent the formation of
unpleasant odours inside the washing tank.
Fill the rinse aid dispenser.
Shut off the water supply tap.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Smeg DI409C and is the answer not in the manual?

Smeg DI409C Specifications

General IconGeneral
BrandSmeg
ModelDI409C
CategoryDishwasher
LanguageEnglish

Related product manuals