socomec ATys C20 User Manual

Operation
Controller ATyS
OPERATION
ATyS C20/C30
56
SOCOMEC - Réf.: 532 214 C
Presentation
Operational modes
Programming
Operation
Visualisation
Automatic sequences
PRESENTATION
Enter operation mode:
• Step 1: press and hold
the “TEST” push button for 5 s
• Step 2: enter the operation code (CE) using
navigation push buttons (code 4000)
• Step 3: press “validation”
push button
Exit operation mode:
Press and hold the “TEST” push button for 5 s
or automatic exit without action during around
2 min
Navigate in operation mode:
• Press “TEST” push button to access
different features
• Press “validation” push button to activate
required function
OPERATION MODE ARCHITECTURE
No, press
“TEST”
No, press
“TEST”
12
12
Led “test on load”
is blinking
Led “test off load”
is blinking
Enter: press 5 seconds
Yes, press
“validation”
Yes, press
“validation”
Exit: press 5 seconds
TEST OFF LOAD
Genset start
sequence
TEST ON LOAD
Loss of priority
source sequence
Led “TEST ON LOAD”
is fixed
Led “TEST OFF LOAD”
is fixed
ATYS 432 A GB
This mode allows in manual mode (not padlocked) to start
a test off load. In automatic mode, it allows to start a test,
on or off load.

socomec ATys C20 Specifications

General

Brand	socomec
Model	ATys C20
Category	Controller
Language	English