153
Changing your setup
Setting the LCD monitor/electronic
viewfinder
The brightness of the LCD monitor is automatically adjusted to the
surrounding lighting conditions using the light sensor (page 15).
You can set the brightness of the LCD monitor manually or select the
setting that is suitable for outdoors on a sunny day.
MENU button t 1 t [LCD Brightness] t Select the desired
setting
Notes
• When it is set to [Auto], do not cover the light sensor with your hand and so on.
• When using the camera with the AC-PW20 AC Adaptor (sold separately), the
brightness of the LCD monitor is always set to the brightest setting even if you select
[Auto].
• Set it to [Auto] or [Manual] for interior photography because [Sunny Weather] is too
bright.
The brightness of the viewfinder is automatically adjusted to the lighting
conditions of the subject.
You can set the brightness of the viewfinder manually.
MENU button t 1 t [Viewfinder Bright.] t [Manual] t
Select the desired setting
Note
• When using the camera with the AC-PW20 AC Adaptor (sold separately), the
brightness of the viewfinder is always set to the brightest setting even if you select
[Auto].
Setting the brightness of the LCD monitor
Setting the brightness of the viewfinder manually
To Next Page
Loading...
Need help?
General
