Sony Bravia KDL-40V4000 User Manual

24
GB
Using BRAVIA Sync
(Control for HDMI)
The control for HDMI function enables the TV
to communicate with the connected equipment
that is compatible with the function, using
HDMI CEC (Consumer Electronics Control).
For example, by connecting Sony equipment
that is compatible with control for HDMI
(with HDMI cables), you can control them
together.
Be sure to connect the equipment correctly,
and make the necessary settings.
Control for HDMI
• Automatically turns the connected
equipment off when you switch the TV to
standby mode using the remote.
• Automatically turns the TV on and
switches the input to the connected
equipment when the equipment starts to
play.
• If you turn on a connected audio system
while the TV is on, the sound output
switches from the TV speaker to the audio
system.
• Adjusts the volume (2 +/–) and mutes the
sound (%) of a connected audio system.
• You can operate the connected Sony
equipment that has the BRAVIA Sync logo
by the TV remote by pressing:
– N/x/X/m/M to operate the connected
equipment directly.
– SYNC MENU to display the menu of the connected
HDMI equipment on the screen.
After displaying the menu, you can operate the
menu screen by using F/f/G/g and .
– TOOLS to display “Device Control”, then select
options from “Menu”, “Options”, and “Content
List” to operate the equipment.
– Refer to the instruction manual of the equipment for
available control.
To connect the equipment that is
compatible with control for HDMI
Connect the compatible equipment and the TV
with an HDMI cable. When connecting an
audio system, be sure to also connect the
DIGITAL AUDIO OUT (OPTICAL) socket of
the TV and the audio system using an optical
audio cable (except for KDL-40S40xx/
40U40xx). For details, see page 21.
To make the control for HDMI settings
The control for HDMI settings must be set on
both the TV side and connected equipment
side. See “HDMI Set-up” on page 30 for the
TV side settings. For settings on the connected
equipment, refer to the operating instructions
for that equipment.

Sony Bravia KDL-40V4000 Specifications

General

Audio system	Dynamic, Standard, BBE ViVA, Virtual Dolby
Number of speakers	2
Plug and Play	Yes
Power requirements	100-240 V
Headphone connectivity	3.5 mm
Comb filter	Digital
Display diagonal	40 \
Display brightness	- cd/m²
Native aspect ratio	16:9
Contrast ratio (dynamic)	33000:1
Display number of colors	16.78 million colors
Analog signal format system	NTSC, PAL, SECAM
HDMI ports quantity	3
Digital audio optical out	1
Product color	Black
LED indicators	Stand-by
Panel mounting interface	300 x 300 mm
Power consumption (standby)	0.19 W
Power consumption (typical)	175 W

Weight and Dimensions

Depth (with stand)	279 mm
Width (with stand)	986 mm
Height (with stand)	684 mm
Weight (with stand)	21500 g
Depth (without stand)	110 mm
Height (without stand)	646 mm
Weight (without stand)	18500 g