33
Projecting
Adjusting the Picture Quality
You can adjust the picture quality that suits your taste by selecting the adjustment items
with the remote control. The adjusted data can be stored in each picture mode.
1 Press ADJ PIC.
Each time you press the button, the
following adjustment windows are
displayed repeatedly in sequence.
“Advanced Iris”, “Lamp Control”,
“Contrast”, “Brightness”, “Color”,
“Hue”, “Color Temp.”, “Sharpness”,
“NR”, “MPEG NR”, “Film Mode”,
“Black Level Adj.”, “Gamma
Correction”, “x.v.Color”, “Color
Space”.
For details on each adjustment, see the
Picture menu. (1 page 41)
Some adjustment windows cannot be
displayed, depending on the type of input
signal. For details, see “Input Signals and
Adjustable/Setting Items” (1 page 69)
2 Make the setting or adjustment
on an item.
When changing the adjustment
level
To increase the value, press M/,.
To decrease the value, press m/<.
When changing the setting
Press M/m to change the setting.
1
ADJ PIC
button
2
M/m/</,
(arrow)
button
Note
Example: To adjust the contrast
To Next Page
Loading...
Need help?
General