23
Basic operations
Playing back a tape
Various playback modes
You can enjoy clear pictures on the LCD screen during still, slow and picture search.
(Crystal-clear still/slow/picture search)
To view a still picture (playback pause)
Press P during playback. To resume playback, press P or (.
To locate a scene (picture search)
Keep pressing 0 or ) during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while advancing the tape or
rewinding (skip scan)
Keep pressing 0 while rewinding or ) while advancing the tape. To resume
normal playback, press (.
To view the picture at 1/5 speed (slow playback)
Press & on the Remote Commander during playback. To resume normal playback,
press (. If slow playback lasts for about 1 minute, it shifts to normal speed
automatically.
To select the playback sound
Change the “HiFi SOUND” mode setting in the menu system.
Notes on playback
•Noise may appear when you use the crystal-clear still/slow/picture serch function to
play back the tape recorded in LP mode.
•Streaks appear and the sound is muted in the various playback modes.
•When playback pause mode lasts for 5 minutes, the camcorder automatically enters
stop mode.
To Next Page
Loading...
Need help?
General