83
Additional information
5
2
3
4
Remote Commander
The buttons that have the same name on the Remote Commander as on the camcorder
function identically.
Identifying the parts
1 Transmitter
Point toward the remote sensor to
control the camcorder after turning on
the camcorder.
2 Video control buttons (p. 21)
3 DISPLAY button (p. 22)
4 START/STOP button (p. 11)
5 Power zoom button (p. 14)
Notes on the Remote Commander
•Keep the remote sensor away from strong light sources such as direct sunlight or
illumination. Otherwise, the remote control may not be effective.
•Be sure that there is no obstacle between the remote sensor on the camcorder and the
Remote Commander.
•This camcorder works in commander mode VTR 2. The commander modes (1, 2 and
3) are used to distinguish this camcorder from other Sony VCRs to avoid remote
control misoperation. If you use another Sony VCR in commander mode VTR 2, we
recommend you change the commander mode or cover the remote sensor of the VCR
with black paper.
To Next Page
Loading...
Need help?
General