Table of
contents
Operation
Search
MENU/Settings
Search
Index
144
GB
Warning indicators and
messages
If a code starting with a letter of the alphabet appears, the self-diagnosis function on the camera
is working. The last two digits (indicated by
ss) will differ depending on the state of the
camera.
If you cannot solve the problem even after trying the following corrective actions a few times,
the camera may need repair.
Contact your Sony dealer or local authorized Sony service facility.
C:32:ss
E:95:ss
• There is trouble with the camera’s hardware. Turn the power off and on again.
C:13:ss
• The camera cannot read or write data on the memory card. Try turning off and on the camera again, or
taking out and inserting the memory card several times.
• The internal memory has experienced a format error, or an unformatted memory card is inserted.
Format the internal memory or the memory card (page 108).
• The inserted memory card cannot be used with the camera, or the data is damaged. Insert a new
memory card.
E:61:ss
E:62:ss
E:91:ss
• A camera malfunction has occurred. Initialize the camera (page 95), then turn the power on again.
E:94:ss
• A malfunction that you cannot service has occurred. Contact your Sony dealer or local authorized
Sony service facility. Inform them of the 5-digit code, which starts from “E”.
If the following messages appear, follow the instructions.
• The battery level is low. Charge the battery pack immediately. Depending on the conditions of use or
the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of
remaining battery time left.
For use with compatible battery only
• The battery inserted is not an NP-BG1 (supplied) or NP-FG1 (sold separately) battery pack.
Self-diagnosis display
Messages
To Next Page
Loading...
Need help?
General
