52
c Select 9 (Focus) with b/B,
then select the distance to the
subject with v/V.
You can select from the following
distance settings.
0.5m, 1.0m, 3.0m, 7.0m, ∞ (unlimited
distance)
To return to auto focus mode
In Step 3, select [Multi AF] or [Center
AF].
• Focal point information may not show the exact
distance. Use it as a guide.
• If you point the lens up or down, the error
increases.
• If focus preset value flashes with [0.5m]
selected, press the zoom W button until the
value stops flashing (DSC-P93A only).
• Some of the distance settings are restricted
based on the position of the mode dial
(page 37).
Shooting with manual
shutter speed and
aperture settings
– Manual Exposure
You can manually adjust the shutter speed
and aperture values.
The difference between the set value and
the appropriate exposure determined by the
camera is displayed on the LCD screen as
the EV value (page 55). 0EV indicates the
most suitable value set by the camera.
a Set the mode dial to M.
b Press z.
“Set” indicated on the lower-left
corner of the LCD screen changes to
“Return” and the camera enters the
manual exposure setup mode.
c Select a shutter speed with v/
V.
A shutter speed can be selected
between 1/1000 of a second and 30
seconds.
If you select 1/6 second or slower
shutter speeds, the NR slow shutter
function (page 37) is automatically
activated. In such cases, “NR” is
indicated at the next to shutter speed
indicator.
0.5m
ISOWB
0.5m
1.0m
3.0m
Center AF
Multi AF
Focus
Mode dial
Shutter button
Control button
250 0
EV
98
FINE
SAF
101
M
F2.8
VGA
Return
To Next Page
Loading...
Need help?
General
