46
For details on the operation
t
page 44
• When you press the zoom button, the zoom scaling indicator appears as follows.
• The maximum zoom scale of smart zoom/precision zoom includes the scale of the optical zoom.
• The AF range finder frame does not appear when using the digital zoom. The or indicator flashes,
and AF operates with priority on subjects located near the center of the frame.
• When using the smart zoom, the image on the screen may look rough. However, this phenomenon has no
effect on the recorded image.
Selects how to superimpose the date or time onto the image. Select this before shooting.
• The date and time do not appear during shooting, instead, the indicator appears. The date and time
appear in red on the lower-right corner of the screen during playback only.
• You cannot insert the date and time into movies or images in the [Multi Burst] mode.
• The date and time superimposed cannot be removed later.
Reduces the red-eye phenomenon when using the
flash. Select this before shooting.
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of
vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance
to the subject, if the subject does not see the pre-strobe, or other conditions.
Date/Time
Day&Time
Superimposes the date, hour, and minute.
Date
Superimposes the year, month and day.
• The date is inserted in the order you select. (t step 2 “Set the
clock” in “Read This First”)
Off
Does not superimpose the date and time.
Red Eye Reduction
On ( )
Reduces the red-eye phenomenon.
• The flash pre-strobes twice or more before shooting.
Off
Does not use Red Eye Reduction.
The W side of this line is the optical zoom area,
and the T side is the digital zoom area
Zoom scaling indicator
To Next Page
Loading...
Need help?
General
