appears in a dotted line. In this case, the camera works to focus on the subjects at the
center of the screen.
When the focus mode is set to other than [Multi AF], you cannot use the Face Detection
function.
You may not be able to set some MENU items depending on the selected REC mode. For
details, see “MENU items not available in some REC modes.” [Details]
Focusing on subjects near the edge of the screen
If the subject is out of focus, do as follows:
1. Recompose the shot so that the subject is centered in the AF range finder (A), and press
the shutter button halfway to focus on the subject (AF lock).
2. When the AE/AF lock indicator (B) stops flashing and remains on, return to the fully
composed shot, and press the shutter button fully down.
As long as you do not press the shutter button fully down, you can retry the procedure as
many times as necessary.
Back to top
Copyright 2010 Sony Corporation
To Next Page
Loading...
Need help?
General
