Cyber-shot User Guide
Print
Operation Search
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Using MENU items (Shooting) > MENU items (Shooting) > Anti Blink
Anti Blink
When Scene Selection is set to (Soft Skin) or (Soft Snap) and the subject blinks while you
are shooting an image, the camera automatically shoots two images consecutively. The camera
will select, display and record the image which the eyes are not blinked automatically.
1. MENU
(Anti Blink) desired mode
(Auto)
When Face Detection is active, the Anti Blink function operates so that images
with the subject’s eyes open are recorded.
(Off)
Does not use the Anti Blink function.
Notes
Anti Blink does not function in the following situations:
When using the flash
During burst shooting
When the Face Detection function does not work
When the Smile Shutter function is activated
Sometimes the Anti Blink function does not work depending on the situation.
When the Anti Blink function is set to [Auto] but only images with the subject’s eyes closed
are recorded, the message “Blinked eye detected” is displayed on the LCD screen. Shoot
again as necessary.
Related Topic
Scene Selection
Back to top
Copyright 2010 Sony Corporation
To Next Page
Loading...
Need help?
General
