149
Troubleshooting Dépannage
Warning indicators
English
If indicators appear on the screen, check the following:
See the page in parentheses “( )” for details.
Warning indicator as to still image
recording
Slow flashing:
•The still image cannot be recorded on the
tape (p. 56).
*
You hear the melody or beep sound.
C:21:00 Self-diagnosis display (p. 148)
E The battery pack has been exhausted
Slow flashing:
•The battery pack has been exhausted.
Depending on operational, environmental
or battery conditions the E indicator may
flash, even if there are approximately 5 to
10 minutes remaining.
% Moisture condensation has occurred*
Fast flashing:
•Eject the cassette, set the POWER switch to
OFF (CHG), and leave it for about 1 hour
with the cassette lid open (p. 172).
Warning indicator as to Cassette
Memory*
Slow flashing:
•No cassette with Cassette Memory is
inserted (p. 160).
Q Warning indicator as to the tape
Slow flashing:
•The tape is near the end.
•No cassette is inserted.*
•The write-protect tab of the cassette is set to
SAVE (p. 163).*
Fast flashing:
•The tape has run out.*
Z You need to eject the cassette*
Slow flashing:
•The write-protect tab on the cassette is set
to SAVE (p. 163).
Fast flashing:
•Moisture condensation has occurred
(p. 172).
•The tape has run out.
•The self-diagnosis display function is
activated (p. 148).
To Next Page
Loading...
