15
Recording still images on the “Memory Stick”
(p. 148)
Monitoring a still image on the LCD screen (p. 174)
1Set the POWER switch to
MEMORY while pressing
the small green button.
Make sure that the LOCK
switch is set to the right
(unlock) position.
2Press PLAY. The last recorded
image is displayed.
1Remove the lens cap.
Viewfinder
When the LCD panel is closed,
pull out the viewfinder placing
your eye against the eyecup.
Adjust the viewfinder lens to your
eyesight (p. 44).
3Press OPEN to
open the LCD
panel.
The picture appears
on the screen.
2Set the POWER switch to
MEMORY while pressing the small
green button.
Make sure that the LOCK switch is
set to the right (unlock) position.
Do not pick up
your camcorder
by the parts
illustrated.
LOCK
MEMORY
CAMERA
VCR
(CHG)OFF
POWER
When you purchase your camcorder, the clock is not set up yet. If you want to record the date and
time for a picture, set the clock before recording (p. 32).
LOCK
MEMORY
CAMERA
VCR
(CHG)OFF
POWER
PLAY
Quick Start Guide
5Press PHOTO deeper.
The image displayed
when you press PHOTO
deeply is recorded on
the “Memory Stick.”
4Press PHOTO lightly.
You can record when
the green z stops
flashing and remains lit.
12
FINE
640
FINE
640
Viewfinder LCD panel Battery pack Flash
To Next Page
Loading...
Need help?
General