Sony DCR-SX41 - Charging the Battery Pack Abroad

• When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
Close the LCD screen. Slide the BATT (battery) release lever CD and remove the battery pack
®.
To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the battery pack:'
Notes on the battery pack and the AC Adaptor
• When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure
that the
1::::1 (Movie)/O (Photo) lamps (p. 14) are turned off.
• Do
not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
• In the default setting, the power turns off automatically ifyou leave your camcorder without any
operation for about 5 minutes, to save battery power ([A.SHUT
OFF)).
Chalrging the b~ttery: pack abroad
You can charge the battery pack in any countries/regions using the ACAdaptor supplied with
your camcorder within the
AC 100 V i~ 240 V, 50 HZ/69 Hirange.
•• Doriot use ari electronic ",oltage tran,sformer: iii;'··
II
us
13