Quick Start Guide
10
Inserting the “Memory Stick” (p. 101)
Insert the “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark
facing up as illustrated.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off, eject the “Memory Stick” or remove the battery pack. Otherwise, image data
breakdown may occur.
Quick Start Guide – Recording on “Memory Stick”
Connecting the power cord
Use the battery pack when using your camcorder outdoors (p. 15).
Open the DC IN
jack cover.
Connect the plug with its v
mark facing up.
AC Adaptor (supplied)
Access lamp
B mark
Press the “Memory Stick”
once lightly to eject it.
4
3
2
1
Fastening the grip belt
Fasten the grip belt firmly.
How to hold
your camcorder
To Next Page
Loading...
Need help?
General