24
GB
Printing
The DPP-MP1 does not include image
processing software. Image processing
software must be obtained separately in
order to print to the DPP-MP1 from
your computer.
1 On the computer, select the
DPP-MP1 as the destination
printer.
2 Make any required print
settings.
When the DPP-MP1 is connected
by USB cable, print settings are
made from the computer. For the
print settings, see Installation
Guide included on the “digital
photo printer for DPP-MP1” CD-
ROM.
3 Print from your image
processing software.
Note
When the DPP-MP1 is connected by USB
cable, all controls other than the power
switch are disabled. When using the DPP-
MP1 to print images directly from a Memory
Stick, be sure to disconnect the USB cable.
To Next Page
Loading...
