Sony FH-C33X User Manual

Ch apter ch ee 3 eee ane baad al hain ice so
. 7 that “AUTO” appears in the display.
Listening to the The tuner starts scanning radio
Radio frequencies automatically, and stops
when it finds a clear station. “TUNED”
appears in the display.
“STEREO” also appears if the FM
=
you
can
have
the
tuner
automatically
scan
;
i
:
4
a
|
@)
the
radio
frequencies
and
tune
in
the
station
tuned
is
broadcast
in
stereo.
;
stations
with
clear
signals.
This
feature
When you want to play a radio programme,
saves you time in searching for stations
with clear signals. However, stations with
‘
weak
signals
may
be
skipped
by
automatic
tuning. Manually tune in the ones skipped
Listening
to
the
Radio
by
automatic
tuning.
POWER—+ON
4 i you don’t want to listen to the station
Presetting
Radio
Stations
selected,
repeat
step
3.
When the desired station is not
tuned in
Automatic tuning may skip the station with
weak signal. Tune in the station manually.
1 Press PRESET/TUNING so that the
PRESET indicator goes off.
2 Press TUNER/TIMER (+/-) repeatedly
until the desired station is tuned in.
Playing Preset Radio
Stations
To improve AM broadcast
reception
Reorient the supplied AM loop.aerial for Eo
AM (MW and SW).
11
CO
AZ
STEREO/ MW/SW
MONO
To change the AM tuning interval
The AM tuning interval is preset to 9 kHz
in the factory. If you need to change the
interval, do as follows:
1 Turn on the power.
2 Change the band to AM.
3 Tur off the power.
1 Press TUNER/BAND (or BAND on the 4 Turn the power back on while pressing
remote commander) repeatedly until the TUNER/TIMER (+). esa
band you want appears in the display. After changing the sa sans interval,
As you press this button, the band reset the preset radio stations. To reset the
changes as follows: interval to the factory setting, follow the
same procedure.
FM > MW > SW
When an FM programme is not clear to
receive
Press STEREO/MONO on the remote
commander so that “MONO” appears in
the display. There will be no stereo effect,
but the reception will improve. Press
STEREO/MONO on the remote
commander again to restore the stereo
effect.
2 Press PRESET/TUNING so that the
PRESET indicator goes off. One Touch Play feature
Press TUNER/BAND (or BAND on the
remote commander) when the power is off.
You will be able to start listening to the
last received station without pressing any
other buttons.
Chapter 3: the Radio

Sony FH-C33X Specifications

General

Brand	Sony
Model	FH-C33X
Category	Stereo System
Language	English