Sony FH-C33X User Manual

[es 2 SOR ee ae a PA
Specifications
CD player section (HCD-C33)
System Compact dise digital
audio system :
Laser Semiconductor laser
Wavelength 780 — 790 nm
Frequency response 2 Hz — 20 kHz
Signal-to-noise ratio
More than 90 dB
Dynamic range More than 90 dB
Tuner section (HCD-C33)
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 — 108.0 MHz
Antenna terminals 75 ohm unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
MW: 531 — 1,602 kHz
(With the MW tuning
interval set at 9 kHz)
SW: 5.95 — 17.90 kHz
AM loop aerial
External aerial terminals
Intermediate frequency
450 kHz
Aerial
Amplifier section (HCD-C33)
Peak music power output
350 watts
Continuous RMS power output
35 +35 watts (6 ohms
at 1 kHz, DIN)
38 +38 watts (6 ohms
at I kHz, 5% THD)
Inputs
LINE IN (phono jack):
sensitivity 450 mV,
impedance 47 kilohms
Outputs
HEADPHONES (stereo minijack):
accepts headphones of 8 ohms
or more.
SPEAKER:
accepts speakers of 6 to
16 ohms.
Tape player section (HCD-C33)
Recording system
4-track 2-channel stereo
Frequency response
(DOLBY NR OFF)
40 — 13,000 Hz (+3 dB),
using Sony TYPE I cassette
40 — 14,000 Hz (+3 dB),
using Sony TYPE II cassette
Wow and flutter
0.1% WRMS + 0.3% (DIN)
For Your Information
Speaker (SS-M33)
Speaker system 3-way, bass-reflex type
(magnetic shielded)
Speaker units
Woofer:
Tweeter:
Super Tweeter:
2 cm dia, dome type
Nominal impedance 6 ohms
Maximum power output
80 watts
13 cm dia., cone type
5 cm dia., cone type
Dimensions
Approx. 175 x 325 x 245 mm (w/h/d)
(7 x 12 7/8 x 9 3/4 inches)
Mass Approx. 3.1 kg
(6 Ib 13 oz) net per
speaker
Supplied accessories
AM loop aerial (1)
Remote commander RM-S343 (1)
Sony SUM-3 (NS) batteries (2)
EM lead aerial (1)
Speaker cords (2)
General
Power requirements
110 — 120 V or 220 — 240 V AC
Adjustable, 50/60 Hz
Power consumption
90 watts
Dimensions
Approx. 225 x 325 x 320 mm (w/h/d)
(8 7/8 x 5 3/8 x 12 5/8 inches)
Mass Approx. 9 kg
(19 lb 13 oz)
Design and specifications are subject to
change without notice.
Ea ee ee ee)
Glossary
Notes on the Recording
Functions
What is Dolby NR*?
Dolby NR is a recording technology that
reduces the high-frequency tape hiss that is
audible when listening to soft music.
* Dolby noise reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
“DOLBY” and the double-D symbol DO
are trademarks of Dolby Laboratories
Licensing Corporation.
What is Tape Select Edit?
Tape Select Edit is a function that selects
the exact length of tape needed to record a
particular CD. Once you insert a CD and
press the button, the CD is recorded (with
all of the tracks in the same sequence as on
the CD) on sides A and-B automatically.
The optimum length of time needed to
record the total playback time is shown on
the display. Using a tape of the indicated
length makes it possible to record the entire
CD without any tracks being cut off in the
middle.
When the tracks are to be recorded in
sequence, they are divided between sides A
and B and a tape length is selected that will
allow for recording without any tracks
being cut in the middle and that will leave
as little blank as possible.
Tracks on the CD
se es ee
*— Side A> + Side B ———"I
¥
[*— Side A——>}
re ee EE
| C7 Css I
—— Side B ———I

Sony FH-C33X Specifications

General

Brand	Sony
Model	FH-C33X
Category	Stereo System
Language	English