Sony Float Run User Manual

0:00 / 0:07
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
2
Pair the headset using the computer.
If Passkey
*
input is required, input “0000”.
The headset and computer are paired and connected with each other.
You will hear the voice guidance say, “Bluetooth connected”.
If they are not connected, see “Connecting to a paired computer (Mac)”.
If [Float Run] does not appear on your computer screen, try again from the beginning of step
.
3
Select [
(System Preferences)] - [Bluetooth] from the Dock at the bottom of the screen.
1.
Select [Float Run] of the [Bluetooth] screen and click [Connect].
2.
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
*
42

Sony Float Run Specifications

General

Brand	Sony
Model	Float Run
Category	Headsets
Language	English