Help Guide
Wireless Stereo Headset
Float Run
Using the voice assist function (Siri)
By using Siri that comes with iPhone, you can speak to the headset’s microphone to operate the iPhone.
Note
Siri cannot be activated when you say “Hey Siri” even when the iPhone’s “Hey Siri” setting is on.
If the headset’s microphone rubs against your clothing, etc., noise may interfere with your voice input. When inputting a voice
command, be careful not to make the microphone’s audio capture hole come in contact with your clothing, etc.
Siri may not be activated depending on specifications of the smartphone or application version.
Be careful because the headset will turn off when you press and hold the
(play/call) button.
Turn Siri on.
On iPhone, select [Settings] - [Siri & Search] to turn [Press Home for Siri] and [Allow Siri When Locked] on.
The operation above is an example. For details, refer to the operating instructions of the iPhone.
Note: For details on Siri, refer to the operating instructions or support website of the iPhone.
1
Connect the headset to the iPhone via Bluetooth connection.
2
When the iPhone is in standby or playing music, press the
(play/call) button on the headset twice in 0.5
seconds.
Siri is activated.
3
Make a request to Siri through the headset’s microphone.
A: Microphone on the remote control component
For details on the apps which work with Siri, refer to the operating instructions of the iPhone.
After activating Siri, when a certain time has passed without requests, Siri will be deactivated.
4
To Next Page
Loading...
Need help?
General
