Hint
When receiving a call on a smartphone or mobile phone, some smartphones or mobile phones may receive a call on the phone
instead of the headset. With an HFP or HSP connection, switch the call to the headset by pressing and holding the
(call)
button for about 2 seconds or by using your smartphone or mobile phone.
Volume for a call can be adjusted during a telephone conversation only.
The headset volume during a call and during music playback can be independently adjusted. Even if you change the volume
during a call, the volume of music playback does not change.
Note
Depending on the connected device or playback application you are using, when you receive an incoming call during music
playback, playback may not resume automatically even after you finish the call.
Use a smartphone or mobile phone at least 50 cm (19.69 in.) away from the headset. Noise may result if the smartphone or
mobile phone is too close to the headset.
If the headset’s microphone rubs against your clothing, etc., noise may interfere with your voice on the call. When talking on the
phone, be careful not to make the microphone’s audio capture hole come in contact with your clothing, etc.
Related Topic
How to make a wireless connection to Bluetooth devices
Making a call
Functions for a phone call
5-047-384-11(1)
Copyright 2023 Sony Corporation
Adjust the volume by pressing the +/– buttons of the headset.
When the volume reaches the maximum or minimum, an alarm sounds.
3
When you finish your phone call, press the
(call) button on the headset to end the call.
If you received a call during music playback, music playback resumes automatically after ending the call.
4
To Next Page
Loading...
Need help?
General
