26
Set the date and time when using this
camcorder for the first time. If you do not set
the date and time, the [CLOCK SET] screen
appears every time you turn on your
camcorder or slide the POWER switch.
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may be
cleared from the memory. In that case, charge the
rechargeable battery and then set the date and time
again (p.139).
Skip to step 4 when you set the clock for the
first time.
1 Touch t [SETUP].
2 Select (TIME/LANGU.) with
/ , then touch .
3 Select [CLOCK SET] with / ,
then touch .
4 Select the desired geographical
area with / , then touch .
5 Set [SUMMERTIME] to [ON] with
/ , if necessary, then touch
.
6 Set [Y] (year) with / , then
touch .
• You can set any year up to the year 2079.
7 Set [M] (month), [D] (day), hour and
minute, then touch .
The clock starts.
• Refer to page 131 for information concerning
“World time difference.”
• The recording date and time are not displayed
during recording, but are automatically recorded
onto the disc and you can check them during
playback ([DATA CODE], p.80).
Step 6: Setting the date and time
POWER switch
To Next Page
Loading...
Need help?
General