Getting started
24
2 Insert a cassette with its window-side
facing up.
3 Press .
The cassette compartment automatically
slides back in.
4 Close the lid.
To eject the cassette
1
Slide the OPEN/ZEJECT lever in the
direction of the arrow and open the lid.
The cassette compartment automatically
comes out.
2 Take out the cassette, then press .
The cassette compartment automatically
slides back in.
3 Close the lid.
Inserting a “Memory Stick Duo”
For details on the “Memory Stick Duo” (such
as write-protection), see page 126.
b Note
• You can use only a “Memory Stick Duo,” which is
about half the size of a standard “Memory Stick,” in
your camcorder (p. 126). Do not try to force any
other type of “Memory Stick” into the “Memory
Stick Duo” slot.
Insert the “Memory Stick Duo” with the b
mark at the bottom left corner until it
clicks.
To eject a “Memory Stick Duo”
Lightly push the “Memory Stick Duo” in once.
Window-side
Push the center of the
back of the cassette
lightly.
b mark
Access lamp
Lightly push in
once.
To Next Page
Loading...
Need help?
General