GPS triangulating status
If you do not want to record location
information
Select
[Setup]
[
General Settings] [GPS
Setting] [Off].
Notes
It may take a while before the camcorder starts
triangulating.
Use the GPS function outdoors and in open
areas, as the radio signals can best be received
in such areas.
The map always displays the north at the top.
Obtaining a map of the current
location (triangulating priority
mode)
This feature is useful for checking a map of
your current location while traveling.
As the camcorder turns other functions
off to search for satellites, obtaining
triangulating information can take priority.
Select [Setup]
[
General Settings] [Your
Location].
Notes
If you select a certain point on the screen, the
map shows an area with that point at the center.
Select
to move your current location back
to the center again.
If the camcorder cannot acquire current
location information, the triangulating
information screen appears (p. 43).
If the location information that was previously
acquired is invalid, the marker does not appear.
To close the current location screen, select
.
Number of dots
changes
Triangulating meters Unable to record
location information
Images will be registered using
the location information that was
previously obtained.
Searching for the
satellites
Triangulating
Unable to
triangulate
A marker (red) that indicates
your current location
Displays the triangulating
inf
or
mation (p. 43)
To Next Page
Loading...
Need help?
General