Sony HT-CT390 User Manual

13
GB
BLUETOOTH Functions
You can enable or disable codec AAC from
BLUETOOTH device (page 16).
To disconnect the BLUETOOTH
device
Perform any of the following items.
• Press PAIRING on the Bar Speaker
again.
• Disable the BLUETOOTH function on
the BLUETOOTH device.
• Turn off the system or the BLUETOOTH
device.
NFC (Near Field Communication) is a
technology enabling short-range
wireless communication between
various devices.
By holding an NFC-compatible remote
device near to the N-Mark on the Bar
Speaker, the system and remote device
proceed to complete pairing and the
BLUETOOTH connection automatically.
• The system only can recognize and
connect to one NFC-compatible device at
a time.
• Depending on your remote device, you
may need to perform the following items
on your remote device in advance.
– Turn on the NFC function. For details,
refer to the operating instructions of
the remote device.
– If your remote device is having an older
OS version than Android 4.1.x,
download and start the “NFC Easy
Connect” application. “NFC Easy
Connect” is a free application for
Android remote devices that can be
obtained from Google Play. (The
application may not be available in
some countries/regions.)
1 Hold the remote device near to
the N-Mark on the Bar Speaker
until the remote device vibrates.
Follow the on-screen instructions
displayed on the remote device,
and complete the procedure for
BLUETOOTH connection.
When the BLUETOOTH connection
is established, the blue LED
indicator on the Bar Speaker lights
up.
2 Start playback of audio source on
the remote device.
For details on playback operations,
refer to the operating instructions of
your remote device.
3 Adjust the volume.
• Adjust the volume of the
BLUETOOTH device.
• Adjust the volume of Bar Speaker
by pressing  +/–.
• Adjust the volume of subwoofer
by pressing SW  +/–.
Tip
Connecting to a remote
device by One-touch
function (NFC)
Compatible remote devices
Remote devices with a built-in NFC
function
(OS: Android 2.3.3 or later, excluding
Android 3.x)
Notes

Sony HT-CT390 Specifications

General

Game mode	Yes
Audio decoders	Dolby Digital, Dolby Dual Mono
RMS rated power	300 W
Audio output channels	2.1 channels
Soundbar speaker RMS power	- W
Subwoofer connectivity	Wireless
Cables included	Optical
Receiver included	-
FM radio	No
Product color	Black
Audio formats supported	LPCM, PCM
Bluetooth profiles	A2DP, AVRCP
Apple docking compatibility	Not supported
Power consumption (standby)	20 W
Power consumption (typical)	45 W
Connectivity technology	Wired & Wireless

Weight and Dimensions

Soundbar weight	2200 g
Subwoofer depth	362 mm
Subwoofer width	170 mm
Subwoofer height	342 mm
Subwoofer weight	6500 g
Main unit dimensions (WxDxH)	900 x 121 x 52 mm