Sony HT-CT390 User Manual

20
GB
2 Prepare screws (not supplied) that
are suitable for the holes in the
brackets.
3 Fasten the screws to 2 studs in the
wall.
The screws should protrude by
5 mm to 6 mm.
4 Hang the Bar Speaker on the
screws.
Align the holes in the brackets with
the screws, then hang the Bar
Speaker on the two screws.
Installing the subwoofer
horizontally
Place the subwoofer on the right side
with the “SONY” logo facing front.
Activating wireless
transmission between
specific units (Secure
Link)
You can specify the wireless connection
to link the Bar Speaker to the subwoofer
using the Secure Link function.
This function can help prevent
interference if you use multiple wireless
products or your neighbors use wireless
products.
1 Press MENU.
2 Press / to select “WS >”, then
press ENTER.
4 mm
More than 30 mm
4.6 mm
Hole in the bracket
10 mm
560 mm
5 mm to
6mm
Attach the supplied speaker pads.

Sony HT-CT390 Specifications

General

Game mode	Yes
Audio decoders	Dolby Digital, Dolby Dual Mono
RMS rated power	300 W
Audio output channels	2.1 channels
Soundbar speaker RMS power	- W
Subwoofer connectivity	Wireless
Cables included	Optical
Receiver included	-
FM radio	No
Product color	Black
Audio formats supported	LPCM, PCM
Bluetooth profiles	A2DP, AVRCP
Apple docking compatibility	Not supported
Power consumption (standby)	20 W
Power consumption (typical)	45 W
Connectivity technology	Wired & Wireless

Weight and Dimensions

Soundbar weight	2200 g
Subwoofer depth	362 mm
Subwoofer width	170 mm
Subwoofer height	342 mm
Subwoofer weight	6500 g
Main unit dimensions (WxDxH)	900 x 121 x 52 mm