Sony HT-CT80 User Manual

17
GB
BLUETOOTH Functions
1 Press (BLUETOOTH).
2 On the BLUETOOTH device, select
“HT-CT80.”
3 Make sure that the BLUETOOTH
indicator (blue) lights up.
4 Start playback on the BLUETOOTH
device.
• When the system has pairing information,
the system is in BLUETOOTH standby
mode even when it is turned off.
By holding an NFC-compatible
BLUETOOTH device near to the N-Mark
on the system, the system and
BLUETOOTH device proceed to
complete pairing and the BLUETOOTH
connection automatically.
1 Download, install, and start the
“NFC Easy Connect” application.
• The application may not be available
in some countries/regions.
• Depending on your BLUETOOTH
device, this operation may not be
required.
2 Touch the N-Mark of the Bar
Speaker with the BLUETOOTH
device.
3 Make sure that the BLUETOOTH
indicator (blue) lights up.
Connection has been established.
• You can connect only one device at a
time.
• Depending on your device, you may need
to set the NFC function to on beforehand.
Refer to the operating instructions of your
device.
• If pairing and the BLUETOOTH connection
fail, do the following.
– Relaunch “NFC Easy Connect” and
move the BLUETOOTH device slowly
over the N-Mark.
– Remove the case from the BLUETOOTH
device if using a commercially available
device case.
Listening to music of the
registered device
Note
Connecting to a BLUETOOTH
device by One-touch
functions (NFC)
Compatible devices
Smartphones, tablets, and music
players with the NFC function built-in
(OS: Android 2.3.3 or later, excluding
Android 3.x)
Notes
Notes
Tip

Sony HT-CT80 Specifications

General

Manual	Yes
Output power	80 W
Apple docking compatibility	Not supported
Number of amplifier channels	2.1 channels
FM radio	No
Product color	Black
Audio formats supported	AAC, MP3, WAV, WMA
Audio decoders	Dolby Dual Mono, Dolby Digital
RMS rated power	- W
Audio output channels	- channels
Woofer diameter	130 mm
Subwoofer location	Separate
Cables included	Optical
HDMI ports quantity	0
USB 2.0 ports quantity	1
Connectivity technology	Wired & Wireless
Power consumption (standby)	0.5 W
Power consumption (typical)	21 W

Weight and Dimensions

Soundbar weight	2000 g
Subwoofer depth	296 mm
Subwoofer width	165 mm
Subwoofer height	243 mm
Subwoofer weight	2700 g
Main unit dimensions (WxDxH)	901 x 84 x 52 mm