13
GB
Getting started
You can enjoy your audio/video equipment connected to the receiver by following the
simple steps below.
Before connecting cords, be sure to disconnect the AC power cord (mains lead).
Installing and connecting the speakers (page 15, 17)
Connecting the TV (page 18)
Connecting other equipment (page 19)
Preparing the receiver
See “Setting the voltage selector” (page 24), “Connecting the AC power cord (mains lead)” (page 24)
and “Turning on the receiver” (page 24).
Setting the speakers
Select the speaker layout settings (page 12), then check the speaker connection using “TEST TONE”
in LEVEL menu (page 25). If the sound is not output correctly, check the speaker connection.
Setting the audio output settings on the connected equipment
To output multi channel digital audio, check the digital audio output setting on the connected
equipment.
For a Sony Blu-ray Disc player, check that “Audio (HDMI)”, “Dolby Digital”, and “DTS” are set to
“Auto”, “Dolby Digital” and “DTS” respectively (as of September 2011).
For a PlayStation 3, check that “BD/DVD Audio Output Format (HDMI)” and “BD Audio Output
Format (Optical Digital)” are set to “Bitstream” (with system software version 3.70).
For details, refer to the operating instructions supplied with the connected equipment.
To Next Page
Loading...
Need help?
General
