Sony HT-M55 - Tuning to Preset Stations; Naming Preset Stations

32
GB
2 Tune to the station that you want to
preset (page 31).
3 Press TUNING MEMORY.
4 Press PRESET + or PRESET – to
select a preset number.
5 Press .
The station is stored as the selected
preset number.
6 Repeat steps 2 to 5 to store
another station.
1 Press TUNER repeatedly (or press
FM or AM) to select the FM or AM
band.
You can also use INPUT SELECTOR
on the receiver.
2 Press PRESET + or PRESET –
repeatedly to select the station.
Each time you press the button, you
can select a preset station as follows:
1 Press TUNER repeatedly (or press
FM or AM) to select the FM or AM
band.
You can also use INPUT SELECTOR
on the receiver.
2 Tune to the preset station which
you want to create an index name
(page 32).
3 Press AMP MENU.
4 Press V/v repeatedly to select
“TUNER”, then press or b.
5 Press V/v repeatedly to select
“NAME IN”, then press or b.
The cursor flashes and you can enter a
character.
6 Press V/v to select a character,
then press B/b to move the input
position backward and forward.
You can enter up to 8 characters to
name the station.
• You can select the character type as
follows by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press b without
selecting a character.
If you made a mistake
Press B/b until the character you want
to change flashes, then press V/v to
select the correct character.
7 Repeat step 6 to input a character
one by one, then press .
The name you entered is registered.
Tuning to preset
stations
Naming preset stations
Tips