EasyManuals Logo
Home>Sony>Home Theater System>HT-RT3

Sony HT-RT3 User Manual

Sony HT-RT3
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
24
GB
HT-RT3
4-587-771-21(1)
D:\NORM'S JOB\SONY HA\SO150044\HT-RT3\4587771211_GB
(CEK)\080ADD.fm
masterpage: Left
Precautions
On safety
Should any solid object or liquid fall into
the system, unplug the system and have
it checked by qualified personnel before
operating it any further.
Do not touch the AC power cord (mains
lead) with wet hands. Doing so may cause
an electric shock.
Do not climb on the Bar Speaker,
Subwoofer and Surround Speakers as you
may fall down and injure yourself, or
system damage may result.
On power sources
Before operating the system, check that
the operating voltage is identical to your
local power supply. The operating voltage
is indicated on the nameplate at the rear
of the Subwoofer.
If you are not going to use the system for
a long time, be sure to disconnect the
system from the wall outlet (mains). To
disconnect the AC power cord (mains
lead), grasp the plug itself; never pull the
cord.
AC power cord (mains lead) must be
changed only at a qualified service shop.
On heat buildup
Although the system heats up during
operation, this is not a malfunction.
If you continuously use this system at high
volume, the system temperature rises
considerably. To avoid burning yourself, do
not touch the system.
On placement
Place the system in a location with
adequate ventilation to prevent heat
buildup and prolong the life of the
system.
Do not place the system near heat
sources or in a place subject to direct
sunlight, excessive dust, or mechanical
shock.
Do not place the Bar Speaker, Subwoofer
and Surround Speakers on a soft surface
(rugs, blankets, etc.) or place anything at
the rear of the Bar Speaker, Subwoofer
and Surround Speakers that might block
the ventilation holes and cause
malfunctions.
If the system is being used in combination
with a TV, VCR, or tape deck, noise may
result and picture quality may suffer. In
such a case, place the system away from
the TV, VCR, or tape deck.
Use caution when placing the system on a
surface that has been specially treated
(with wax, oil, polish, etc.), as staining or
discoloration of the surface may result.
Take care to avoid any possible injury
from the corners of the Bar Speaker,
Subwoofer and Surround Speakers.
Keep 3 cm or more space under the Bar
Speaker and Surround Speakers when
you hang it on a wall.
On operation
Before connecting other equipment, be
sure to turn off and unplug the system.
If you encounter color irregularity
on a nearby TV screen
Color irregularities may be observed on
certain types of TV.
If color irregularity is observed...
Turn off the TV, then turn it on again after
15 to 30 minutes.
If color irregularity is observed again...
Place the system further away from the
TV.
On cleaning
Clean the system with a soft, dry cloth. Do
not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or
benzine.
If you have any question or problem
concerning your system, please consult
your nearest Sony dealer.
Additional Information

Other manuals for Sony HT-RT3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony HT-RT3 and is the answer not in the manual?

Sony HT-RT3 Specifications

General IconGeneral
Disc types supportedNo
Optical disc player typeNot included
Multichannel decodingYes
Card reader integrated-
Audio decodersDolby Digital, Dolby Dual Mono
RMS rated power600 W
Audio output channels5.1 channels
Audio formats supportedLPCM, PCM
Product colorBlack
Cables includedOptical
Subwoofer typeActive subwoofer
Digital audio optical out1
Power consumption (typical)85 W
Weight and Dimensions IconWeight and Dimensions
Main unit weight2100 g
Subwoofer weight7800 g

Related product manuals