15
GB
Connecting the Wireless
Amplifier Manually
The wireless amplifier is connected to
the subwoofer automatically when they
are turned on.
If you cannot connect the wireless
a
mplifier to the subwoofer
automatically, or you use multiple
wireless products and want to specify
the subwoofer that is connected
wirelessly to the wireless amplifier,
perform the manual connection.
1 Press MENU.
[CURRENT STATUS] appears in the
fro
nt panel display.
2 Press / to select [SPEAKER],
then press ENTER.
3 Press / to select [LINK], then
press ENTER.
4 Press / to select [START], then
press ENTER.
[LINK] flashes in the front panel
di
splay.
To cancel the manual connection,
pre
ss BACK.
5 Press LINK on the wireless
amplifier.
The manual link starts.
The power indicator of the wireless
amp
lifier flashes twice in amber
repeatedly.
6 When [DONE] appears in the front
panel display, press MENU.
The link is established and the
po
wer indicator of the wireless
amplifier lights in amber.
If [ERROR] appears in the front panel
display, the connection of the wireless
amplifier has not been established.
Perform the manual connection again.
Note