Sony HT-S40R User Manual

35
GB
Troubleshooting
If the speaker system does not work
properly, handle it in the following order.
1 Search for the cause and solution of
the issue using this troubleshooting.
2 Reset the speaker system.
All the settings of the speaker system
re
turn to their initial status. For
details, see “Resetting the Speaker
System” (page 41).
Should any problems persist, consult
y
our nearest Sony dealer.
Be sure to bring your bar speaker,
su
bwoofer, wireless amplifier, and
surround speakers even if it seems as
though only one has a problem, when
you request to repair.
The speaker system does not power
up.
 Check that the AC power cord (mains
lead) is connected securely.
 Di
sconnect the AC power cord (mains
lead) from the wall outlet (mains), and
then reconnect after several minutes.
The speaker system is turned off
automatically.
 The auto standby function is working.
Set [SYSTEM] - [AUTO STANDBY] to
[OFF] (page 33).
The speaker system does not turn
on even when the TV is turned on.
 Set [HDMI] - [CONTROL FOR HDMI] to
[ON] (page 32). The TV must support
the Control for HDMI function. For
d
etails, refer to the operating
instructions of your TV.
 C
heck the speaker settings of the TV.
The speaker system power syncs with
the speaker settings of the TV. For
details, refer to the operating
instructions of your TV.
 D
epending on the TV, if the sound
was output from the speakers of the
TV the previous time, the speaker
system may not turn on by
interlocking with the TV power even
when the TV is turned on.
The speaker system turns off when
the TV is turned off.
 Check the setting of the Control for
HDMI function (page 32). When the
Control for HDMI function is set to on
an
d the input of the speaker system is
the TV input, the speaker system turns
off automatically when you turn off
the TV.
The speaker system does not turn
off even when the TV is turned off.
 Check the setting of the Control for
HDMI function (page 32). When you
turn off the TV, the speaker system
turns
off automatically only if the
input of the speaker system is TV
input. The TV must support the
Control for HDMI function. For details,
refer to the operating instructions of
your TV.
There is no picture or the picture is
not output correctly.
 Select the appropriate input.
 Wh
en there is no picture while the TV
input is selected, select the TV
channel that you want using the TV
remote control.
 Di
sconnect an HDMI cable, then
connect it again. Make sure that the
cable is firmly inserted.
Troubleshooting
Power
Picture

Sony HT-S40R Specifications

General

Wi-Fi	-
USB port	Yes
Bluetooth version	5.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wireless
Package depth	520 mm
Package width	968 mm
Package height	248 mm
Package weight	15000 g
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Soundbar power consumption	20 W
Power consumption (standby)	0.5 W
Subwoofer power consumption	55 W
Cables included	AC, Optical
Product color	Black
Audio formats supported	LPCM, MP3, WAV, WMA
Audio decoders	Dolby Digital, Dolby Dual Mono
RMS rated power	600 W
Audio output channels	5.1 channels
Rear speaker RMS power	75 W
Surround modes quantity	4
Front speakers RMS power	90 W
Subwoofer connectivity	Wired
Harmonized System (HS) code	85182200

Weight and Dimensions

Width	900 mm
Height	52 mm
Cord length	1.5 m
Soundbar weight	2000 g
Subwoofer depth	366 mm
Subwoofer width	192 mm
Subwoofer height	387 mm
Subwoofer weight	7800 g
Rear speaker depth	180 mm
Rear speaker height	74.5 mm
Rear speaker weight	600 g