Help Guide
Wireless Stereo Headset
LinkBuds
Turning on the headset
When the headset is set into the charging case
When the headset is not set into the charging case
When the headset is not worn in your ears for about 15 minutes after being removed from the charging case, the
headset turns off automatically. In this case, turn the headset on by putting on the headset into your ears. The headset
will also turn on when it is set into the charging case and then removed from the charging case.
By using the “Sony | Headphones Connect” app, you can change the setting of the headset so that it will not be turned
off automatically.
When the headset is turned on
When both headset units are removed from the charging case, the connection between the left and right units of the
headset is established.
The headset goes into Bluetooth pairing mode when turning on the headset for the first time after purchase or just after
initializing the headset.
Related Topic
Using only one unit of the headset
Turning off the headset
What you can do with the “Sony | Headphones Connect” app
Hold the charging case in your hand and press the lid open button to open the lid.
1
Remove the headset from the charging case.
The headset turns on automatically.
When you remove only one unit from the charging case, only the removed unit turns on.
2
To Next Page
Loading...
Need help?
General
