Back Back to Top Print
Go to Page Top
Go to Page Top
Wireless Stereo Headset
MDR-AS800BT
Switching the left and right channels
Switch the left and right channels when you wear the headset with Secure Fit Loop.
1. Play back music.
2. Press the multi-function button 3 times consecutively, holding the button down at the third push ( ).
When the sound volume reaches minimum, you will hear a warning beep. Continue to press the button for about 5
seconds. After channels are switched, you will hear a beep from the left ear side (left channel).
3. Adjust the volume.
Hint
Press the button 3 times with short intervals between each press (about 0.4 seconds) so the operations will be
recognized as being consecutive.
To return to the original setting, perform steps 1 and 2 again.
Related Topic
Changing the headset to Secure Fit Loop
4-546-398-11(2)
Copyright 2014 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
Need help?
General
Weight and Dimensions
