12
GB
MHC-RV8 4-240-082-11 (1)
To
Select a CD when
playback is stopped
Switch to CD function
from another source
Play repeatedly
(Repeat Play)
Cancel Repeat
Play
Exchange other CDs
while playing
Remove the CD
*1
All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*2
To repeat the current track you are playing.
Tip
Pressing the CD while the power is off automatically
turns the power on and CD is selected as the function
(except for the Power Saving Mode).
Programming the VIDEO
CD/CD tracks
–– Program Play
You can make a program of up to 25 tracks
from all the VIDEO CD/CDs in the order you
want them to be played.
1 Press CD.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears in the display.
3 Press one of the DISC 1~3 to select a
CD.
Playing the CD (continued)
4 Press . or > repeatedly until the
track you want appears in the display.
5 Press ENTER.
The track is programmed. The program step
number appears, followed by the total
playing time.
6 To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7 Press hH.
Other Operations
To
Cancel Program Play
Clear a track from
the end
Add a track to the
program when
playback is stopped
Track
number
Total playing time
(including selected
track)
PROGRAM
Disc tray
number
Do this
Press PLAY MODE
repeatedly until “ALL
DISC”, “1 DISC” or
“ALBUM” appears in the
display.
Press CLEAR on the remote
when playback is stopped.
1 Press one of the DISC
1~3 buttons to select a
CD.
2 Press . or >
repeatedly to select the
track.
3 Press ENTER.
Do this
Press one of the DISC 1~3
buttons (except SHUFFLE
ALL DISCS mode) or DISC
SKIP EX-CHANGE (or
D. SKIP on the remote).
Press CD or one of the DISC
1~3 buttons (Automatic
Source Selection).
Press REPEAT repeatedly to
select “REPEAT”
*1
or
“REPEAT 1”
*2
.
Press REPEAT until
“REPEAT”
or “REPEAT 1”
disappears from the display.
Press DISC SKIP
EX-CHANGE.
Press OPEN/CLOSE Z.
To Next Page
Loading...
Need help?
General
