24
GB
MHC-RV8 4-240-082-11 (1)
Other Features
Changing the spectrum
analyzer display
Press SPECTRUM.
Each time you press the button, the display
changes cyclically as follows:
SPECTRUM 1 t SPECTRUM 2 t
SPECTRUM 3 t PATTERN 1 t
PATTERN 2 t PATTERN 3 t
PATTERN OFF
Adjusting the brightness
of the display
Press DIMMER.
Each time you press the button, the display
changes cyclically as follows:
DIMMER 1 t DIMMER 2 t DIMMER 3
Enhancing the video game
sound
— Game Sync
You need to connect a video game player
(see “Connecting a Video Game Player” on
page 30).
Press GAME.
Tips
• Pressing GAME while the power is off
automatically turns the power on and game is
selected as the function (except for Power Saving
Mode).
• The previously selected GAME EQ is automatically
selected.
Mixing the sound
— Game Mixing
You can mix the sound from the component
connected to the GAME INPUT jacks with
another function such as CD, tape, radio or
an MD connected to this system.
1 Select source sound you want.
2 Press GAME MIXING.
Each time you press the button, the level of
the game sound and the display changes
cyclically as follows:
MIXING LOW t MIXING MID t
MIXING HIGH t MIXING OFF
Tips
• To record the mixed sound, press GAME MIXING
after step 4 of “Recording Manually” on page 19
and then press REC PAUSE/START to start
recording.
• The GAME MIXING indicator lights up while
Game Mixing is activated and it will remain active
while the power is on even if the function is
changed.
Notes
• If you press GAME MIXING during VCD
playback, the TV screen will display the video
image from the component connected to the GAME
INPUT jacks.
• Game Mixing is cancelled when you press REC
PAUSE/START.
• Game Mixing does not function during High Speed
Dubbing and CD Synchro Recording.
To Next Page
Loading...
Need help?
General
