30
GB
MHC-RV8 4-240-082-11 (1)
Hooking Up the Optional Components
Connecting a Video Game
Player
You can enjoy the video games with audio
emphasis by connecting a video game player.
To
Listen to the sound
of a connected
video game player
Select the preset effect
Note
Pressing GAME while the power is off automatically
turns the power on and GAME is selected as a
function. The equalizer also switches to GAME EQ
and the previously selected effect is restored.
To the audio and video output of your
video game player.
To the video input of your TV
Do this
Press GAME (or GAME on
the remote).
(See “Selecting the preset
effect” on page 22)
To the audio
output of your
MD deck/VCR
Connecting an MD deck
or VCR
You can connect your MD deck or VCR to this
system. Be sure to match the color of the plugs
and the connectors.
To
Make an analog
recording from CD,
TAPE or TUNER
on to a Mini Disc
Record the audio and
video signals from
VIDEO CD on to a
video tape
Listen to the analog
sound of a connected
MD deck
Listen to the
connected VCR
Notes
• Pressing the MD (VIDEO) while the power is off
automatically turns the power on and MD is
selected as a function.
• If the sound is distorted or too loud when VIDEO
function is selected, or you want to switch back to
MD function, repeat the operation described above
to switch to MD function.
Do This
Connect the AUDIO OUT
jacks to the audio input of the
MD deck.
Connect the AUDIO OUT
jacks to the audio input of
VCR. Connect the VIDEO
OUT jack to the video input
of the VCR.
Press MD (VIDEO).
Hold down MD (VIDEO) and
press @/1 while the power is
on. Release @/1 first, then
release MD (VIDEO). This
switches the function from
MD to VIDEO. Once you
switched to the VIDEO
function, just press MD
(VIDEO).
To the audio input of
your MD deck/VCR
To Next Page
Loading...
Need help?
General
