26-GB
On the remote control
There is no display window on the remote control. Menu items
should be viewed in the display window on the recorder.
1 While the recorder is recording or stopped, press EDIT for 2
seconds or more, press . or >N repeatedly until
“DISPLAY” flashes in the display, and then press ENTER (x).
2 Press . or >N repeatedly until the information you want
flashes in the display.
Each time you press >N, the display changes as step 2 of
“On the recorder” (page 24).
3 Press ENTER (x).
The display changes as step 3 of “On the recorder” (page 25).
To Next Page
Loading...
Need help?
General