EasyManuals Logo
Home>Sony>CD Player>MZ-R70 Analog PCLink

Sony MZ-R70 Analog PCLink User Manual

Sony MZ-R70 Analog PCLink
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
58-GB
Troubleshooting
Should any problem persist after you have made these checks,
consult your nearest Sony dealer.
Symptom Cause/Solution
The recorder
does not work
or works
poorly.
Audio sources may not be securely connected.
, Disconnect the audio sources once and
connect them again (pages 6, 16).
The HOLD function is turned on (HOLD
appears in the display when you press an
operation button on the recorder).
, Disable HOLD by sliding the HOLD switch
in the opposite direction of the arrow
(page 35).
Moisture has condensed inside the recorder.
, Take the MD out and leave the recorder in a
warm place with the lid open for several hours
until the moisture evaporates.
The rechargeable battery or dry battery is weak
(r or LOW BATT flashes).
, Charge the rechargeable battery or replace the
dry battery (page 51).
The rechargeable battery or dry battery have been
inserted incorrectly.
, Insert the battery correctly (page 53).
You pressed a button while the disc indication
was rotating quickly.
, Wait until the indication rotates slowly.
When recording digitally from a portable CD
player, you did not use AC power or did not
disable the anti-skip function such as ESP (pages
8, 9).
The analog recording was made using a
connecting cord with an attenuator.
, Use a connecting cord without an attenuator
(page 16).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MZ-R70 Analog PCLink and is the answer not in the manual?

Sony MZ-R70 Analog PCLink Specifications

General IconGeneral
BrandSony
ModelMZ-R70 Analog PCLink
CategoryCD Player
LanguageEnglish

Related product manuals